What size chain do I need for my bike?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

Are bike chains a standard size?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.

What size person does a 20 inch bike fit?

Most 8 and 9-year-olds will fit on a 20-inch wheel bike. Meanwhile, a 10-year-old (or older) will likely use the 24-inch size. Keep in mind that if your 10-year-old is smaller, they may still be more comfortable with a 20-inch bike wheel.

How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

What is a good thickness for a chain?

For a clean minimal look, we recommend a 2-3mm chain. This thickness is also the perfect width for a pendant. For someone who wants their chain to stand out a bit more but doesn’t want anything too crazy, a 4-7mm chain is great.

How do I choose a chain sprocket size?

Determine the number of teeth of the small sprocket. The number of teeth for the large sprocket is determined by multiplying the number of teeth for the small sprocket by the speed ratio. More than 15 teeth on the small sprocket is recommended. The number of teeth on the large sprocket should be less than 120.

How do I know if my bike is 10 or 11 speed?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.

Are 11 and 12 speed chains the same?

12-speed chains can operate just fine with 11-speed cassettes. The main exception are Shimano’s new 12-speed HG+ models which are heavily optimized for downshifting and thus come with custom inner plates that don’t mix well with non-Shimano 12-speed components.