What kind of cassette do I need for my bike?

The vast majority of road bikes come with a 12-25 cassette, which is suitable for most cycling terrain when paired with a compact or standard chainset. If you ride a lot of hills or struggle with hill climbing, a cassette with a lower ratio largest sprocket (27 or more teeth) may be beneficial.

What does an 11-32 cassette mean on a bike?

The rear cassette is 11 speed 11-32. This means there are 11 cogs ranging from 11 teeth up to 32 teeth (the exact cogs are 11/12/13/14/16/18/20/22/25/28/32). The combination of your selected chainring and cog determine the gear ratio.

What is the difference between 11 28 and 11-32 cassette?

For the 11-32 cassette, the average change in cadence is 9 rpm when you change gears, while for the 11-28 cassette, the average change is 8 rpm. In concept this difference is intuitive, although the magnitude on average is not that different between the cassettes – just 1 rpm.

How much does it cost to replace a bike cassette?

It cost anything between $20 and $150 to replace a bike cassette, depending on size and brand. There are a few high-end cassettes, nonetheless, that cost as much as $300 or more. Note that you’ll need to factor in the labor cost and the chain cost (if it’s worn out), each averaging $20.

What is an 11 28 cassette?

Currently, the most common gearing setup on new road bikes is a 50/34 chainset with an 11-28 cassette. This means that the big and small chainring have 50 and 34 teeth, respectively, and the cassette’s smallest cog has 11 teeth and its largest cog has 28 teeth.

What does 10-speed mean on a bike?

A 10-speed bike is a type of road bicycle that allows you to change the pedaling resistance through a shifting mechanism. The various gears provide up to 10 different resistance settings, or speeds. This type of bicycle engineering makes riding on hilly terrain over long distances easier.

Can you change cassette size?

Do You Need A Longer Chain For A Bigger Cassette? In most cases when increasing the cassette ratio the chain needs to be taller to prevent the derailleur from stress positions on big cogs and also to maintain smoother shifting performance, you can change it to a new one or add some links to the current chain.

What is the cassette on a bike?

The cassette on your bicycle can be found on the rear wheel and is a cluster of sprockets that are a part of the drivetrain. They slide onto the freehub, the ratchet system that controls the drive of your bicycle when you pedal, and can have anything from 5 to 12 ‘speeds’.

Is gear 1 high or low on a bike?

Bikes generally have 1, 3, 18, 21, 24, or 27 speeds. (10- and 15-speeds are obsolete and you don’t see them on new bikes anymore.) Lower numbers are the low gears, and higher numbers are the high gears. First gear is a low gear.

What size cassette do pros use?

Pros often use a 55×11-tooth high gear for time trials. On flat or rolling stages they might have 53/39T chainrings with an 11-21T cassette. In moderate mountains they switch to a large cog of 23T or 25T. These days, they’ve joined the big-gear revolution like many recreational riders.

What bike gear do you use to go uphill?

When riding uphill or into a headwind, it’s best to use the small or middle front chainring and bigger rear cogs. When riding downhill, it’s best to use the bigger front chainring and a range of the smaller rear cogs.

Is 11/32 cassette Good for hills?

Most riders can get away with a compact chainset 50 / 34 and an 11 – 32 cassette for their steepest hills. Many touring bikes and tandems still use triple chainsets, but they often have heavier loads to haul.