Often asked: How Do I Know What Size Chain To Buy For My Bike?

What replacement chain do I need for my bike?

Another way to check for chain stretch is to measure the chain with a ruler or tape measure. On a new chain, 12 full links (measuring from pin to pin) will measure exactly 12 inches long. If the 12 links measure 12 1/8 inches or more, you need to replace the chain.

What size chain do most bikes use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

How often should I lube my bike chain?

Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.

How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

You might be interested:  What Size Schwinn Bike Do I Need?

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

Is WD40 bad for bike chains?

You can use WD-40 Multi-Use-Product. It is a water based lubricant that provides the right amount of lubrication to the chain lube. WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free.

What is the best lubricant for a bike chain?

Best bike chain lubes – our picks

  • Rock N Roll Gold.
  • Silca Super Secret Chain Lube.
  • Green Oil Wet Lube.
  • Finish Line Wet.
  • CeramicSpeed UFO Ceramic lube.
  • Tru Tension All Weather.
  • Molten Speedwax. Wax chains take a bit of extra work, but are well worth the effort.
  • Squirt chain lube. High-performance, wax-based lube.

Can you use 3in1 oil on bike chains?

Lubricate it There are a variety of lubricants on the market in spray and bottle form, with specific formulas for wet and dry conditions. Using WD40 or 3-in-1 oil may seem pudent but it won’t things running smoothly and will cause dirt and grime to stick to the chain and prematurely wear.

How much does it cost to replace a bicycle chain?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

You might be interested:  Readers ask: How To Determine Bike Pedal Axle Size?

How long do bike chains last?

Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

Leave a Reply

Your email address will not be published. Required fields are marked *