# FAQ: What Size Bike Chain For Cruiser?

## What size chain does a beach cruiser use?

you probably need a 1/2 x 1/8 chain with 112 links or so. Check out KMC chains that come in all sizes, types and colors. You will also need a chain tool to adjust length.

## How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

## What size chains do bikes use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

## How do you measure anchor chain link?

Anchor chain is measured in two primary ways – thickness of the metal in the link, and the length of the link. The most precise method is to use Vernier calipers, though with care a measuring tape can get a close enough estimate.

You might be interested:  Question: If Your Inseam Is 30" And Your Height Is 5'10", What Size Bike Should You Ride?

## How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

## Are all bike chains the same width?

No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

## What is the difference between 1 8 and 3/32 chain?

Bicycle chain comes in two basic widths: 1/8″ chain is used on most single-speed bicycles, and bicycles with internal gearing. 3/32″ chain is used on derailer equipped bicycles that have more than 3 speeds.

## How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

## Is 26 inch bike good for what height?

Is 26 inch bike good for what height? Bikes that are 26 inches in size work well for children and adults who range from approximately five feet to six-feet tall. They can also be appropriate for some taller people, but the best way to find out if it’s a good fit is by testing ride one!

You might be interested:  Readers ask: What Do Bike Tire Size Numbers Mean?

## What size bike should a 5’2 woman ride?

What size bike does a 5’2 woman need? A woman in this height range will be fine with a bike frame of between 15 and 16 inches.

## Is a 24-inch bike too small for a woman?

Women whose heights are 5.4” and below can ride a 24-inch bike. This is because the frame is the right height to accommodate the length of their legs and will ensure they find it easy to peddle. It also means that you need to get a smaller bike with a sizeable frame.