FAQ: How To Properly Size Bike Chain?

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

How long should a bicycle chain be?

Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

How do I know if my chain is too long?

If the chain is really short, then you might not even be able to shift into the largest cog. Then, if you shift into the smallest chainring and smallest cog and if the rear derailleur pulls the chain back so far that it comes in contact with itself, the chain is too long.

How can I tell if my bike chain is stretched?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

You might be interested:  Quick Answer: How To Determine Bike Inner Tube Size?

How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

When should I shorten my bike chain?

Most of the time, you will inspect your chain to know whether it needs a replacement. You should count the links from the first pin to the last pin. You must ensure that the gap between the pins corresponds to 12 inches. If it extends to more than 12 ⅛ inches, it is time to replace your bike chain or shorten the chain.

Should I shorten my bike chain?

Why Shorten a Bike Chain? All bikes come with a recommended bike chain length. It’s important to stick to this length if you want to ride comfortably and preserve the life of the rear derailleur. It’s the bike chain that does the work of getting the tires in rotation so that your bike can get in motion.

What is a chain stay?

What is the chainstay? The chainstay or “stays” = The pair of frame tubes that joins the bottom bracket shell to the rear axle holders (the slots the back wheel goes in). This means that the chain stays connect the bottom bracket (BB) to the center of the back wheel.

Do bike chains stretch over time?

Chain wear is commonly referred to as ‘chain stretch’, because the chain’s pitch grows in length as it wears. This is the most important type of chain wear, and the growth comes from the bushings wearing with the chain pins. Overtime, the inner diameter of these bushings increase and the pins groove out.

Leave a Reply

Your email address will not be published. Required fields are marked *